Mercedes/BMW Car Audio interface ensures the steering wheel audio controls and the factory analog amplifier works when replacing factory radio. Connect this interface to the wires on your new stereo's wiring harness, power, ground, and factory speaker connections for your new stereo. Interface also has parking brake, reverse, and Vehicle Speed Sensor (V.S.S.) outputs that you'll need if you're installing a navigation receiver. Note: This adapter will not work with the (M.O.S.T & Logic7) digital amps (Fiber OPTIC) Systems use different System See Details for a list of compatible car stereos. Make Model Year Harness BMW 1 Series (E81/82/87/88) 2007-2013 Quadlock 3 Series (E90/91/92) 2005-2012 Quadlock Mercedes A-Class (W169) Audio 5 2004-2010 ISO Quadlock 2004-2010 Quadlock B-Class (W245) Audio 5 2004-2010 ISO Quadlock 2004-2010 Quadlock C-Class W203 2000-2003 ISO W203 2000-2006 Quadlock W204 2007-2012 Quadlock CLK-Class (W208) 1999-2002 ISO E-Class W210 1999-2000 ISO W212 2009-2012 Quadlock M-Class (W164) 2005-2011 Quadlock R-Class (W251) 2006-2011 Quadlock SL-Class (R230) 2001-2004 ISO Sprinter (W906) 2010-2017 Quadlock
Non-amplified or Amplified factory audio systems including Bose (except Bose with fiber-optic amplifiers).
Not compatible with vehicle's featuring fiber-optic digital amplifiers.
You'll only be able to retain your steering wheel audio controls with a compatible car stereo made by
Alpine, Blaupunkt, Clarion, Jensen, JVC, Kenwood, Pioneer, or Sony.
No other brands are currently compatible.
Check the Details on your Stereo to see if steering wheel audio controls are integrated.
connect a new stereo in select Mentioned Vehicles.
Retain your steering wheel audio controls and use of non-digital factory amplifier
Provides connections for Vehicle Speed Sensor (V.S.S.)
Reverse gear
Illumination for installing navigation receivers Radio replacement interface module (for Select Models Below) 2 Wiring harnesses (included)
SWC harnesses
Installation Instructions
Digital Interface Box Steering Wheel Control Retention:
steering wheel control output for Pioneer, Sony, Alpine, Clarion, Kenwood, JVC, and Blaupunkt aftermarket head units. The steering wheel control output consists of a right-angle 3.5mm connector and a light blue/yellow wire (use the connection that your aftermarket head unit is fitted with). The SWC module will work with any of the listed aftermarket head units, by setting its three dip-switches (see owner's manual for appropriate setting). Navigation Outputs:
The Radio replacement interface module provides a VSS (vehicle speed sense) and a Reverse Gear output to make installing an aftermarket Navigation radio simpler and less time consuming. Amp Turn-On:
Provides an amplifier turn-on lead for your vehicle's factory analog amplifiers (if equipped). This adapter is not compatible with vehicles that feature fiber-optic, digital amplifiers. Wiring Harness:
Includes two wiring harnesses; there is a 2-connector factory harness (16-/10-pin) and a 1-connector (44-pin) factory harness. Only one will be used based on the type of factory plug behind your radio. Each harness also features a 12-pin connector that plugs into the interface module. The wiring harness also provides bare-wire leads (power/ground, speaker, illumination, turn-on, and navigation) which will need to be hardwired to your aftermarket head unit's wiring harness. Wire Color Function Black Chassis Ground Red +12 Volt Accessory Yellow +12 Volt Constant Orange Illumination Blue Amp Turn-On White Left Front Speaker + White/black Left Front Speaker - Note:
Two vehicle harnesses (Quadlock or ISO) are included with the interface; you will only use one of these harnesses based on your type of vehicle. Note:
The steering wheel control harness features two 4-pin connectors
(labeled - Pioneer/Sony and Alpine/Clarion/Kenwood/JVC).
You will only plug in one of these connectors to the interface module
Based on the type aftermarket head unit you are installing.
Powered by SixBit's eCommerce Solution
Returns Accepted for this item if it's within 30 Days